Make Your Own Hanging Mason Jar Lantern [DIY]

by Carla in — Updated November 18, 2019 — Reading Time: 3 minutes

 

diy hanging mason jar lanternWedding lanterns bring glowing ambiance to your venue. What’s great about them is they are perfect for both indoor and outdoor weddings. Whether you hang them along the aisle, on the ceiling or make them your centerpiece, they have that charismatic effect the guests can’t resist. Today, we are going to make simple yet elegant mason jar lanterns that give a sophisticated vibe to your big day.

You need:

  1. Mason jar
  2. Electrical Wire
  3. Pliers
  4. Wire cutter

First, grab about 13-inches of electrical wire. Using knife or cutter, slice the plastic coating to get the copper wire. Copper wire is one of the important materials for this project. You can also directly buy copper wire from the local store to save you from this task.

diy hanging mason jar lantern
Step 1:Slice open the electrical wire and get the copper wire.

Now, you have a shining copper wire. Grab pliers and at one end of the copper wire, you will make a loop. Hold the one end and twist it around until it looks like a pea shape. Wrap the copper wire around the neck of the jar. Then, hold it halfway around and bend the wire. About 1/2 inch from the bend, cut the wire using wire cutter. This will give you enough space to twist the wire. Get the pliers and do on this other end what you did with the last one. Just make this one a little bigger and make the two loops face each other.

diy hanging mason jar lantern
Step 2:Make loops at both ends of the wire.

You are going to do the same with the other piece. Make one loop at other end. Give a little space as you will insert this loop with the other piece. Hook the two loops and use pliers to close back up around the loop. Again, measure the copper wire around the jar’s neck and cut the excess. Make another loop in another end. Hook it with the other piece. Secure the loops tightly so you still have your lantern in one piece at the end of the day.

diy hanging mason jar lantern
Step 3:Hook the two pieces of wire through the loops.

Next, we will work on the handle. Get another 13-inch copper wire. Create a loop at other end but keep it open and hook it with the horizontal loop. Use pliers to close it. Pull the wire to straight it out before you bend it. Create loop at one end, hook it and secure it. Stretch the wire a bit to give it a nice curve for a perfect handle.

diy hanging mason jar lantern
Step 4:Create the handle from copper wire and hook it with the horizontal loops.

And that’s it! You are done! An adorable and simple DIY hanging mason jar lantern for one-of-a-kind wedding. Moreover, you can place candles or LED lights that serve as substitute to light at night.

diy hanging mason jar lantern
Step 5:Hang the mason jar lanterns to the desired locations.

Watch How it is Done

Save All the Steps Above through this Bookmarklet

diy-hanging-mason-jar-lantern

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.